Pressure Regulating Valves
A-31, A-31S
Small Pressure Regulating Valves for Water, Air, Light Oil

Applications:
Drinking fountains, bubblers, water coolers, humidifiers,
beverage dispensers, spraypaint rigs, air tools, etc. For
water, air, light oil.

Sizes: 1/8", 1/4", 3/8"

Features:
Reduces high pressure to lower outlet pressure within
close limits. Good for inlet pressures up to 300 psi.
Maximum temperature 180°F (82°C).


Click here for PDF (CAVMC-0508-US)
A-31 HC
Pressure Regulating Valve For Mobile Homes

Applications:
Mobile homes and recreational trailers.

Sizes: 3/8" only

Features:
This modified regulator is specially designed for mobile
homes and recreational trailer installations where space
limitations are important and relatively low capacity is
required.

Click here for PDF (CAVMC-0508-US)
A-360, A-361, A-362
Small Commercial Pressure Regulating Valves

Applications:
Recommended for regulating the flow of air, oils, gases
and all non-corrosive fluids. Not for use on steam.

Sizes: 1/4", 3/8", 1/2" (A-362 1/4" and 3/8" only)

Features:
The A-360 and A-361 incorporate an aspirating action to
give exceptionally good regulation at high flow rates.
Maximum initial pressure, 400 psi. Maximum delivery
pressure, 175 psi. Maximum temperature, 180° F (82°C).

Type A-360 has one inlet and one outlet; furnished with
forged brass body.

Type A-361 is designed for 3-way or 4-way use. One inlet,
three outlets. Gauge tappings 1/4" NPT; cast bronze body.

Type A-362 is a special modification of the A-360 for
pressures up to 1,100 psi inlet, to 250 psi outlet. Sizes
1/4" and 3/8" only.

Click here for PDF (CAVMC-0508-US)
B
Pressure Regulating Valve

Applications:
Water, air, light oil: spray equipment, dishwashers, air
tanks, food, chemical and industrial process lines.
Steam: unit heater, pressing irons, steam cookers,
degreasers, sterilizers, vulcanizers.

Sizes:
1/4", 3/8", 1/2", 3/4", 1", 11/4", 11/2", 2" on NPT or BSPP
Threads.

Features:
Automatically maintains, within close limits, the desired
reduced pressure in the service line. Threaded
connections.

Iron body valves are for initial pressures up to 200 psi on
water, air, oil, or other liquids, and for initial pressures up
to 150 psi on
steam. Maximum delivery pressure in all cases is 125
psi. Bronze body valves are for initial pressures up to 400
psi on water, air,
oil, etc. and for pressures up to 250 psi on steam.
Maximum delivery pressure 150 psi. Teflon® Seat
available for temperatures to 350° maximum on steam.


Click here for PDF (CAVMC-0509-US).
B-95
Pressure Reducing or Pressure Build Regulating Valve

Applications:
Suitable for almost any service. Water, air, light oil,
steam: suitable for chemical, food, pulp and paper
industry, utility lines, and specialist OEM applications.
Cryogenic: suitable for liquid or gas phase in the
pressure build circuit of cryogenic storage tanks.

Sizes: 1/2", 3/4", 1" in NPT or BSPP Threads.

Features:
Automatically maintains, within close limits, the desired
reduced pressure in the service line. Threaded
connections. Investment cast carbon steel and stainless
steel bodies, chambers and bottom plug, with stainless
steel trim and a choice of metal-to-metal, Teflon® or
BUNA-N-seating. Initial pressure up to 720 psig,
reduced pressures up to 400 psig and the operating
temperature range is -320°F to +450°F depending on the
trim options.

Click here for PDF (CAVMC-0509-US).
BBC
Pressure Regulating Valve For Heavy Oil

Applications:
Intended for Heavy Oil Service (Bunker C and other
grades), dirty liquids, high viscosity fluids.

Sizes: 3/8", 1/2", 3/4", 1", 11/4", 11/2"

Features:
Direct-acting, single-seat, spring-loaded diaphragm.
Maintains lower pressure within reasonably close limits.

Iron or bronze bodies, threaded connections, Monel® or
BUNA-N diaphragm. Stainless steel piston and seat,
both of which are renewable. Standard valve equipped
with square head adjusting screw. Maximum initial
pressure in iron, 200 psi; maximum reduced pressure,
125 psi. In bronze, maximum initial pressure, 400 psi;
maximum reduced pressure, 200 psi.


Click here for PDF (CAVMC-0509-US).
BCA
Pressure Regulating Valve For Ammonia

Applications:
Gas or Liquid Ammonia Service

Sizes: 3/8", 1/2", 3/4", 1", 11/4", 11/2"

Features:
Direct-acting, single-seated, spring-loaded
diaphragm. Maintains lower pressure within
reasonably close limits. Cast in gray iron. Threaded
connections, Monel® diaphragm, stainless steel
piston, seat, pusher post button, iron bottom plug.
Piston seat and body seat are easily renewable.
Rustproof steel bolting. Maximum initial pressure, 200
psi; maximum reduced pressure, 125 psi.


Click here for PDF (CAVMC-0509-US).
E-55
High Capacity Pressure Regulating Valve

Applications:
All types of water systems; various pneumatic,
cryogenic and hydraulic systems, etc.

Sizes: 1/2", 3/4", 1", 11/4", 11/2", 2" in NPT and BSPT
threads.

Features:
Aspirated design for close pressure control. Handles
high and variable flow rates well beyond the
limitations of ordinary regulators. Bronze body with
stainless steel body seat. Brass built in strainer is
easily removed for cleaning. Maximum initial pressure,
400 psi. Delivery pressure: maximum 300 psi;
minimum 25 psi. Maximum temperature 180°F (82°C).

Click here for PDF (CAVMC-0510-US).
G-4
Pilot Operated Pressure Reducing Valve

Applications:
Steam heating lines, dryers, ovens, sterilizers, oil
heaters, steam jacketed equipment etc. and any other
steam, air and gaseous application.

Sizes:
1/2", 3/4", 1",11/4",11/2", 2" threaded
21/2", 3", 4", 5", 6" CL125 flange
1/2", 3/4", 1",11/4",11/2", 2", 21/2", 3", 4", 5", 6" CL150
and CL300 flanges

Features:
Self-actuated pilot operated pressure reducing valve
providing very high capacity with less <1 psi fall-off. It
is very compact in design, offers positive shut-off and
is available in iron, bronze, cast and stainless steel for
pressures up to 600 psi inlet, between 1 and 300 psi
outlet and temperatures up to 800°F. Stainless steel
seats are used for steam, and where a tighter shut-off
is required for air and gases, BUNA-N and TFE®
seats are used. Also may be modified for oxygen gas
service.


Click here for PDF (CAVMC-0512-US).
G-60
High Capacity Pressure Regulating Valve

Applications:
Dryers, steam atomizing oil burners, plastic
molding, cookers, degreasers, sterilizers. Also,
liquid or gas cryogenic service.

Sizes: 1/4", 3/8", 1/2", 3/4", 1", 11/4", 11/2"

Features:
Self-contained, self-actuated, threaded connections.
Produces exceptional control with high capacity. Its
design offers a wide range of adjustment and
exceptional sensitivity of control.


Click here for (CAVMC-0511-US).
LS
Series High Pressure Regulating Valve

Applications:
Designed for use on air, water, light oil, oxygen,
carbon dioxide and other gases and fluids.

Sizes: 3/8", 1/2", 3/4"

Features:
Single-seated, spring-loaded, direct-acting
diaphragm type regulator. Maintains reduced
pressure within reasonably close limits regardless
of inlet fluctuations. Maximum initial pressure up to
2,400 psi. Delivery pressure: maximum, 500 psi;
minimum, 40 psi. Bronze body, spring chamber and
bottom plug; stainless steel piston/piston
assemblies, cylinders, seat ring and strainer
screens; BUNA-N diaphragm and O-rings.
Self-renewable seat ring may be flipped over and
reinstalled rather than replaced.


Click here for PDF (CAVMC-0513-US).
Cash Valve Home Page
Industrial Valves & Controls
© 2014 Towle Whitney LLC All Rights Reserved